防火卷帘门的安装要求和使用说明
Installation requirements and operation instructions of fireproof rolling shutter door
1、安装卷帘门的洞口上部不得设有通风管、水管等；
1. The upper part of the hole where the rolling shutter door is installed shall not be provided with ventilation pipe, water pipe, etc;
2、电源线路(三相五线和消防中控信号线)由用户铺设到卷门机旁的电气控制箱边；
2. The power line (three-phase five wire and central fire control signal line) is laid by the user to the electric control box beside the door rolling machine;
3、卷帘门安装好后，安装吊顶，吊顶边缘应离帘板50MM，以免磨擦；
3. After the rolling shutter door is installed, the ceiling shall be installed, and the edge of the ceiling shall be 50mm away from the curtain plate to avoid friction;
4、调试及使用时，严禁底部 站

保定平面设计培训 收费岛模具 挡土墙模具 防撞墙模具 防撞墙模具 防撞护栏模具 大棚遮阳网 遮阴网

人。电器设施不得擅自拆搬；
4. When debugging and using, it is forbidden to stand at the bottom. Electrical facilities shall not be removed without authorization;
5、根据消防管理规定，防火卷帘门为消防专用设施，不得改作他用，卷帘正下方不得堆放任何物品；
5. According to the fire management regulations, the fire shutter door is a special fire-fighting facility, which can not be used for other purposes, and no goods are allowed to be stacked under the shutter;
6、安装调试后，每季度启动一次，以检查电器、机械性能，检查时注意操作安全。
6. After installation and commissioning, start once a quarter to check the electrical and mechanical properties, and pay attention to the operation safety during the inspection