注意事项一：GMT自动门轨道如果是安装在焊接的铁龙骨架上，GMT自动门整体骨架材料请使用壁厚3毫米以上的方铁管，或其它牢固度相当(或更好)的材料。这个很重要，因为如果固定自动门的材料不稳定，自动门谈何稳定？对吧？

Note: a GMT automatic door track if it is installed in the GMT Citroen frame welding, automatic door frame material use wall thickness of 3 mm above the square pipe, or other solid degrees (or better) materials. This is very important, because if the material of the fixed automatic door is not stable, what is the stability of the automatic door? Right?

注意事项二：骨架安装时请一定保证整体骨架水平，垂直，牢固，紧密稳实。安装轨道的面要平整无毛刺，保证铝合金轨道安装上去后水平垂直，牢固。请安装时使用水平管量好水平。

Note two: the framework installation please ensure that the overall frame level, vertical, solid, solid close. The surface of the installation of the track should be smooth and without burr, so that the aluminum alloy track will be installed vertically and firmly after the installation of the aluminum alloy track. Please use the level of the horizontal tube at the time of installation.

注意事项三：如安装在承重墙上或真他附着物上，保证铝合金轨道安装上去后水平垂直，牢固。请安装时使用水平管量好水平。这个很重要，因为如果不是水平垂直，自动门运行很容易会卡住！

Note three: if installed on the load-bearing wall or on the true attachments, the aluminum alloy track is installed vertically and firmly after the installation of the aluminum alloy track. Please use the level of the horizontal tube at the time of installation. This is very important, because if it is not vertical, the automatic door can easily be stuck!

注意事项四：止摆器的安装请在门体安装调正后安装，止摆器一定要与地面安装牢固，长期使用不松动。

Note four: the installation of the pendulum is installed after the installation of the door body, and the pendulum must be firmly installed with the ground, and the long term use is not loose.

注意事项五：如果使用GMT自动门的无框自动门专用门夹，请一定要用已配套的螺丝套，皮垫。因为是专门配置的，其他公司的产品未必会兼容我们的门夹。

Note five: if you use a frame free door clip of a frame free door for GMT automatic door, be sure to use a matching screwdriver and leather pad. Because it is specially configured, the products of other companies may not be compatible with our door clips.